Low Price Pure Nickel Strip 201 for Battery

• Customization: Available
• Application: Industrial
• Purity: >99.5%
• Model NO.: Nickel 201
• Alloy: Non-alloy
• Type: Wire & Strip
• Powder: Not Powder
• Condition: Bright, Annealed
• Transport Package: in Spool, Carton, Wooden Case
• Specification: 200
• Trademark: Ualloy
• Origin: China
• Production Capacity: 500 Tons/Year

Product Description

Nickel® 201
Available in any of the 'profile options'
A commercially pure Nickel (typically 99.6% Nickel), Nickel 201 is essentially the same as Nickel 200, but with a lower Carbon content to prevent embrittlement by inter granular carbon at temperatures over 315oC (600oF). Lower carbon content also reduces hardness.

Chemical Composition

Specifications

Designations

Key Features

Typical Applications

Element	Min %	Max %
Ni	99.0	-
Cu	-	0.25
Fe	-	0.40
C	-	0.02
Si	-	0.35
Mn	-	0.35
Mg	-	0.20
Ti	-	0.10
S	-	0.01
Co	-	2.00

ASTM B160
ASTM B162
BS 3076 NA12

W.NR 2.4061
W.NR 2.4068
UNS N02201
AWS 071

Low-carbon version of Nickel 200.
Preferred to Nickel 200 for applications involving exposure to temperatures above 315°C (600°F).
Resistant to various reducing chemicals & caustic alkalies.
Good magnetostrictive properties.
High electrical and thermal conductivity.
Good ductility and low work hardening rate.
Good weldability and solderability.

Electronic components.
Electrical components.
Lead in wires for heating elements.
Battery connections/terminals.
Chemical processing.
Aerospace components..
Food processing.
Synthetic fibre processing.

Density	8.89 g/cm³	0.321 lb/in³
Melting Point	1446°C	2635°F
Coefficient of Expansion	13.1 μm/m °C (20 - 100°C)	7.3 x 10-6 in/in °F (70 - 212°F)
Modulus of Rigidity	82 kN/mm²	11893 ksi
Modulus of Elasticity	207 kN/mm²	30000 ksi

Electrical Resistivity
8.5 μΩ • cm	51 ohm • circ mil/ft

Thermal Conductivity
79.3 W/m • °C	550 btu • in/ft2 • h • °F

Properties
Condition	Approx. tensile strength		Approx. operating temperature
	N/mm²	ksi
Annealed	400 - 500	58 - 73	Tensile strength and elongation drop significantly at temperatures above 315°C (600°F). Service temperature is dependent on environment, load and size range.
Hard Drawn	700 - 900	102 - 131

The above tensile strength ranges are typical. If you require different please ask.