0.1*8mm 0cr13al4 Heating Ribbon for Heater Strips

• Customization: Available
• Product Type: Wire
• Material: Fecral
• Model NO.: 0cr13al4
• Carbon Content: Low Carbon
• PCD: 100mm
• ET: 15mm
• Hole: 8
• Status: Bright,Oxidized.Acid White
• Max. Continuous Service Temp. of Element: 950
• Resistivity at 20. C: 1.25+-0.08 Ohm mm2/M
• Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance
• Transport Package: in Spool, Carton, Wooden Case
• Specification: ISO9001, ISO14001
• Trademark: Ualloy
• Origin: China
• HS Code: 72209000
• Production Capacity: 300tons/Year

Product Description

FeCrAl alloys heating ribbon wire
1. Introduction to products
FeCrAl alloy is a ferritic iron-chromium-aluminium alloy with high resistivity and has superior oxidation resistance for use at temperatures up to 1450 centigrade degree., as compared to other commercial Fe and Ni base alloy.

2. Application
Our Products are widely applied to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.

3. Properties
Grade: 1Cr13Al4
Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance
Max. Continuous service temp. Of element(° C): 950degrees
Resistivity at 20. C(μ Ω @m): 1.25+-0.08 ohm mm2/m

The allowable tolerance of alloy strip GB/T1234-2012
Category	Thickness ( mm )	Tolerance ( mm)
		Common precision	High precision
Cold-rolled strip	0.05 ~ 0.1	±0.01	±0.005
	0.1 ~ 0.2	±0.015	±0.01
	0.2 ~ 0.5	±0.02	±0.015
	0.5 ~ 1.0	±0.03	±0.025
	1.0 ~ 1.8	±0.04	±0.03
	1.8 ~ 2.5	±0.05	±0.04
	2.5 ~ 4.0	±0.06	±0.05
Hot-rolled Strip	2.5 ~ 5.0	±0.25	±0.2
	5.0 ~ 7.0	±0.3	±0.25
	7.0 ~ 10.0	±0.4	±0.35
	10.0 ~ 20.0	±0.5	±0.45
The allowable tolerance of alloy strip GB/T1234-2012
Category	Width ( mm )	Tolerance ( mm )
		side cut		Nonside cut
		Common precision	High precision
Cold-rolled Strip	5.0 ~ 10.0	±0.2	±0.1	-0.6
	10.0 ~ 20.0			-0.8
	20.0 ~ 30.0			-1
	30.0 ~ 50.0	±0.3	±0.15	-1.2
	50.0 ~ 100.0			±1.0
	100.0 ~ 200.0	±0.5	±0.25	±1.5
	200.0 ~ 300.0			±1.8
Hot-rolled Strip	15.0 ~ 60.0	/		±1.5
	60.0 ~ 200.0			±2.5
	200.0 ~ 300.0			±3.0

 

The allowable tolerance of alloy wire and rod diameter GB/T1234-2102
Category	Diameter(mm)	Tolerance(mm)
Cold-drawn steel wire	0.02 ~ 0.025	0.02 ~ 0.025
	0.025 ~ 0.03	0.025 ~ 0.03
	0.03 ~ 0.05	0.03 ~ 0.05
	0.05 ~ 0.1	0.05 ~ 0.1
	0.1 ~ 0.3	0.1 ~ 0.3
	0.3 ~ 0.5	0.3 ~ 0.5
	0.5 ~ 1.0	0.5 ~ 1.0
	1.0 ~ 3.0	1.0 ~ 3.0
	3.0 ~ 6.0	3.0 ~ 6.0
	6.0 ~ 8.0	6.0 ~ 8.0
	8.0 ~ 10.0	8.0 ~ 10.0
Hot-finished rod	5.5 ~ 12.0	±0.4