• Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
  • Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
  • Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
  • Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
  • Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices

Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices

Type: Strip
Standard: GB
Technique: Cold Drawn
Shape: Strip, Roll
Surface Treatment: Polished
Application: Utomatic Control Devices and Instrumentation
Customization:

Contact Supplier

Diamond Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
5J20110
Size
(0.05-3.0mm)T*(>1mm)W
Condition
Bright,Printed
Property
Can Replace Kanthal 1200
Brand
Ualloy
Product Namewith Good Performance as Kan
Printed Bimetal Alloy Material 5j20110 Ribbon
Transport Package
Rolled, Then Packed Into Plywood Pallet or Case
Trademark
UALLOY
Origin
Hangzhou, China
HS Code
7226999001

Product Description

Printed Bimetal alloy material 5J20110 ribbon used in  electric vacuum devices

(Common Name: Truflex P675R, Chace 7500, Telcon200, Kanthal 1200)
Bimetallic 5J20110 holds very high thermal sensitivity and higher resistivity,but the modulus of elasticity and allowable stress is lower,it can improve the sensitivity of the instrument,decrease the size and increase the force.
 
Composition
Grade 5J20110
High expansion layer Mn75Ni15Cu10
Low expansion layer Ni36
 
Chemical composition (%)
 
Grade C Si Mn P S Ni Cr Cu Fe
Ni36 ≤0.05 ≤0.3 ≤0.6 ≤0.02 ≤0.02 35~37 - - Bal.
 
Grade C Si Mn P S Ni Cr Cu Fe
Mn75Ni15Cu10 ≤0.05 ≤0.5 Bal. ≤0.02 ≤0.02 14~16 - 9~11 ≤0.8

Typical Physical properties
Density (g/cm3) 7.7
Electrical resistivity at 20ºC(ohm mm2/m) 1.13 ±5%
Thermal conductivity, λ/ W/(m*ºC) 6
Elastic Modulus,  E/ Gpa 113~142
Bending K / 10-6 ºC-1(20~135ºC) 20.8
Temperature bending rate  F/(20~130ºC)10-6ºC-1 39.0%±5%
Allowable temperature (ºC) -70~ 200
Linear temperature (ºC) -20~ 150

Application: The material is mainly used as Non magnetic non matching ceramic sealing material in Gyro and other electric vacuum devices.

Style of supply
Alloys Name Type Dimension
5J20110 Strip W= 5~120mm T= 0.1mm
  Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices
Printed Bimetal Alloy Material 5j20110 Ribbon Used in Electric Vacuum Devices

 

Send your message to this supplier

*From:
*To:
avatar Mr. Michael Qiu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Number of Employees
15
Year of Establishment
2012-02-06