Factory Price Nickel 205 Sheet

• Application: Industrial
• Purity: >99.5%
• Alloy: Non-alloy
• Type: Wire & Strip
• Powder: Not Powder
• Condition: Bright, Annealed
• Model NO.: Nickel 205
• Transport Package: in Spool, Carton, Wooden Case
• Specification: 205
• Trademark: Ualloy
• Origin: China
• Production Capacity: 500 Tons/Year

Product Description

Nickel® 205
Available in any of the 'profile options'
Nickel 205 is similar to Nickel 200, but has compositional adjustments to enhance its performance in electrical and electronic applications.

Chemical Composition

Specifications

Designations

Key Features

Typical Applications

Element	Min %	Max %
Ni	99.0	-
Mg	0.01	0.08
Ti	0.01	0.05
Cu	-	0.15
Fe	-	0.20
C	-	0.15
Si	-	0.15
S	-	0.008
Mn	-	0.35

-

W.NR 2.4061
UNS N02205
AWS 072

 Similar to Nickel 200 but has compositional adjustments to enhance its performance in electrical and electronic applications

Anodes and grids of electronic valves.
Lead wires.
Transistor Housings.
Magneto-strictive Transducers.

Density	8.89 g/cm³	0.321 lb/in³
Melting Point	1446°C	2635°F
Coefficient of Expansion	13.3 μm/m °C (20 - 100°C)	7.4 x 10-6 in/in °F (70 - 212°F)
Modulus of Rigidity	82 kN/mm²	11893 ksi
Modulus of Elasticity	207 kN/mm²	30000 ksi

Electrical Resistivity
9.5 μΩ • cm	57 ohm • circ mil/ft

Thermal Conductivity
75 W/m • °C	520 btu • in/ft2 • h • °F

Properties
Condition	Approx. tensile strength		Approx. operating temperature
	N/mm²	ksi
Annealed	400 - 500	58 - 73	Tensile strength and elongation drop significantly at temperatures above 315°C (600°F). Service temperature is dependent on environment, load and size range.
Hard Drawn	700 - 900	102 - 131

The above tensile strength ranges are typical. If you require different please ask.