High Quality Nickel 200 Strip

• Customization: Available
• Application: Industrial
• Purity: >99.5%
• Model NO.: Nickel 200
• Alloy: Non-alloy
• Type: Wire & Strip
• Powder: Not Powder
• Condition: Bright, Annealed
• Transport Package: in Spool, Carton, Wooden Case
• Specification: 200
• Trademark: Ualloy
• Origin: China
• Production Capacity: 500 Tons/Year

Product Description

Nickel® 200
Available in any of the 'profile options'
Nickel 200 is commercially pure and has good mechanical properties and excellent corrosion resistance to alkalis i.e. Sodium hydroxide. It also has good electrical, thermal and magneto-strictive properties.

Chemical Composition

Specifications

Designations

Key Features

Typical Applications

Element	Min %	Max %
Ni	99.0	-
Cu	-	0.25
Fe	-	0.40
C	-	0.15
Si	-	0.35
Mn	-	0.35
Mg	-	0.20
Ti	-	0.10
S	-	0.01
Co	-	2.00

ASTM B160
ASTM B162
BS 3075 NA11
BS 3076 NA11

W.NR 2.4060
W.NR 2.4066
UNS N02200
AWS 070

Commercially pure nickel.
Resistant to various reducing chemicals & caustic alkalies.
Good magnetostrictive properties.
High electrical and thermal conductivity.
Good ductility and low work hardening rate.
Good weldability and solderability.

Electronic components.
Electrical components.
Lead in wires for heating elements.
Battery connections/terminals.
Chemical processing.
Aerospace components..
Food processing.
Synthetic fibre processing.

Density	8.89 g/cm³	0.321 lb/in³
Melting Point	1446°C	2635°F
Coefficient of Expansion	13.3 μm/m °C (20 - 100°C)	7.4 x 10-6 in/in °F (70 - 212°F)
Modulus of Rigidity	81 kN/mm²	11748 ksi
Modulus of Elasticity	204 kN/mm²	29588 ksi

Electrical Resistivity
9.6 μΩ • cm	58 ohm • circ mil/ft

Thermal Conductivity
70.2 W/m • °C	487 btu • in/ft2 • h • °F

Properties
Condition	Approx. tensile strength		Approx. operating temperature
	N/mm²	ksi
Annealed	400 - 500	58 - 73	Tensile strength and elongation drop significantly at temperatures above 315°C (600°F). Service temperature is dependent on environment, load and size range.
Hard Drawn	700 - 900	102 - 131

The above tensile strength ranges are typical. If you require different please ask.