Customization: | Available |
---|---|
Product Type: | Rod |
Material: | Feni |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Ualloy-4J29 also known as Kovar alloy. it was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.
Ualloy-4J29was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.
Mainly used in electric vacuum components and emission control, shock tube, igniting tube, glass magnetron, transistors, seal plug, relay, integrated circuits lead, chassis, brackets and other housing sealing.
Normal composition%
Ni |
28.5~29.5 |
Fe |
Bal. |
Co |
16.8~17.8 |
Si |
≤0.3 |
Mo |
≤0.2 |
Cu |
≤0.2 |
Cr |
≤0.2 |
Mn |
≤0.5 |
C |
≤0.03 |
P |
≤0.02 |
S |
≤0.02 |
|
|
Tensile Strength, MPa
Code of condition |
Condition |
Wire |
Strip |
R |
Soft |
≤585 |
≤570 |
1/4I |
1/4 Hard |
585~725 |
520~630 |
1/2I |
1/2 Hard |
655~795 |
590~700 |
3/4I |
3/4 Hard |
725~860 |
600~770 |
I |
Hard |
≥850 |
≥700 |
Typical Physical properties
Density (g/cm3) |
8.2 |
Electrical resistivity at 20ºC(mm2/m) |
0.48 |
Temperature factor of resistivity(20ºC~100ºC)X10-5/ºC |
3.7~3.9 |
Curie point Tc/ ºC |
430 |
Elastic Modulus, E/ Gpa |
138 |