| Customization: | Available |
|---|---|
| Product Type: | Wire & Strip |
| Material: | Cu Ni Mn |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hangzhou Ualloy Material Co.,Ltd is one of the best copper mn alloy 6j13 manufacturers and suppliers in China, welcome to buy discount and low price shunt manganin, manganin 43, cumn12ni4, manganin, 6j13 from us, and also welcome to check the price and quotation with our factory.
Shunt Manganin 43(Precision Resistance wire)
(Common Name: Manganin 43,CuMn12Ni4,Manganin,6J13)
Shunt Manganin 43 is a copper-manganese-nickel alloy (CuMnNi alloy) for use at room temperature. The alloy is characterized by very low thermal electromotive force (emf) compared to copper.
Shunt Manganin43 widely used for Shunt resistor with the highest requirements, shunt manganin43 has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
Specification
Wire: Diameter: 0.04mm-8.0mm
Strip: Thickness: 0.01mm-3.0mm
Width: 0.5mm-120mm
Normal composition%
|
Nickel |
4 |
Manganese |
12 |
|
Copper |
Bal. |
|
|
Typical Mechanical properties(1.0mm)
|
Yield strength |
Tensile Strength |
Elongation |
|
Mpa |
Mpa |
% |
|
180 |
390 |
15 |
Typical Physical properties
|
Density (g/cm3) |
8.4 |
|
Electrical resistivity at 20ºC (ohm*mm2/m) |
0.43 |
|
Temperature factor of resistivity(20ºC~600ºC)X10-5/ºC |
-7~40 |
|
Thermal coefficient at 20ºC (WmK) |
22 |
|
EMF vs Cu(μV/ºC )(0~100ºC ) |
<2 |
|
Coefficient of thermal expansion |
|
|
Temperature |
Thermal Expansion x10-6/K |
|
20 ºC- 100ºC |
18 |
|
20 ºC- 400ºC |
19.5 |
|
Specific heat capacity |
|
|
Temperature |
20ºC |
|
J/gK |
0.41 |
|
Melting point (ºC) |
960 |
|
Element working temperature in air (ºC) |
5~45 |
|
Magnetic properties |
non-magnetic |
Corrosion resistance performance
|
Alloys |
Working In atmosphere at 20ºC |
Working at max temperature 200ºC |
|||||
|
Air and oxygen contain gases |
gases with Nitrogen |
gases with sulfur oxidability |
gases with sulfur reductibility |
carburization |
|||
|
Manganin43 |
good |
bad |
bad |
bad |
bad |
good |
|
Style of supply
|
Alloys Name |
Type |
Dimension |
||
|
Manganin43W |
Wire |
D=0.03mm~8mm |
||
|
Manganin43R |
Ribbon |
W=0.4~40 |
T=0.03~2.9mm |
|
|
Manganin43S |
Strip |
W=8~200mm |
T=0.1~3.0 |
|
|
Manganin43F |
Foil |
W=6~120mm |
T=0.003~0.1 |
|
|
Manganin43B |
Bar |
Dia=8~100mm |
L=50~1000 |
|
){kind=link}