Product Type: | Wire |
---|---|
Material: | Ni Cr |
Condition: | Bright, Annealed |
Transport Package: | in Spool, Carton, Wooden Case |
Trademark: | Ualloy |
Origin: | China |
Customization: |
---|
Suppliers with verified business licenses
1.Introduction
INCONEL alloy 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic Ni-Cr-Mo-W
alloy offering outstanding corrosion-resistance in a range of severe environments. Its
high nickel (Ni) and molybdenum (Mo) provide good resistance in reducing conditions,
and high chromium (Cr) offers resistance to oxidizing media. Molybdenum (Mo) and
tungsten (W) aid resistance to localized corrosion such as pitting. Iron (Fe) is closely
controlled to enhance properties. Low carbon (C) helps minimize grain boundary
precipitation to maintain corrosion-resistance in the heat-affected zones of welded
joints. Resistance to general, pitting and crevice corrosion increases with the alloying
(Cr+Mo+W) content, and INCONEL alloy 686 scores higher than competitive materials.
2.Chemical composition
|
Cr |
Mo |
W |
Ti |
Fe | C | Mn | S | Si |
P |
Ni |
MIN |
19 |
15 |
3 |
0.02 |
|
|
|
|
|
|
|
MAX |
23 |
17 |
4.4 |
0.25 |
2 |
0.01 |
0.75 |
0.02 |
0.08 |
0.04 |
bal |
3.Physical properties
Density, lb/in3 .....................................................................0.315
g/cm3 ......................................................................8.73
Melting Range, °F .....................................................2440-2516
°C .....................................................1338-1380
Electrical Resistivity, ohm•circ mil/ft .................................744.4
Permeability at 200 oersted (15.9 kA/m).........................1.0001
Suppliers with verified business licenses