Customization: | Available |
---|---|
Product Type: | Rod |
Material: | Cu,Ni,Zn |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Cu | Fe | Mn | Ni | Pb | Zn |
54.0~58.0 | < 0.25 | < 0.5 | 16.5~19.5 | < 0.1 | Remainder |
Articles | Chemical composition | |||||
GB | UNS | EN | JIS | Cu% | Ni% | Zn% |
BZn18-26 | C77000 | CuNi18Zn27 | C7701 | 54-58 | 16.5-19.5 | Rem |
Physical properties | fabrication properties | |||||||||
density g/cm3 | electrical conductivity %IACS | thermal conductivity W/(m.K) | modulus of elasticity GPa | specific heat J/(g.K) | cold-workability | machinability | electric plating property | hot dip tin plating property | weldability | corrosion |
8.7 | 5 | 32 | 125 | 0.34 | excellent | suitable | excellent | excellent | good | excellent |
Mechanical properties | |||||||||||
State | Hardness HV | Tension test | bending(in rolling direction)rest | bending(transverse to rolling direction)test | |||||||
thickness mm | tensile strength MPa | yield strength MPa | elongation% | thickness mm | angles | ID | thickness | angles | ID | ||
1/2H | 150-210 | 0.1-0.7 | 540-655 | ≥390 | ≥8 | ≤1.6 | 180° | 150% of thickness | ≤0.5 | 180° | 300% of thickness |
≥0.71 | 540-655 | ≥390 | ≥11 | ||||||||
H | 180-240 | 0.1-0.7 | 630-735 | ≥390 ≥500 | ≥4 | ≤1.6 | 180° | 200% of thickness | ≤0.5 | 180° | 400% of thickness |
≥0.71 | 630-735 | ≥500 | ≥6 | ||||||||
EH | 210-260 | ≥0.1 | 705-805 | ≥600 | - | ≤1.6 | 90° | 300% of thickness | ≤0.5 | 90° | 600% of thickness |
SH | 230-270 | ≥0.1 | 765-865 | ≥680 | - | - | - | - | - | - | - |
Condition | 1/2 Hard | Hard |
Hardness | 150 ~ 210 HV | 180 ~ 240 HV |
Tensile Strength | 540 ~ 655 MPa | 630 ~ 735 MPa |
Elongation | Min. 8% | Min. 4% |