• Bright 0cr25al5 Fecral High-Resistance Heating Wire for Water Heater
  • Bright 0cr25al5 Fecral High-Resistance Heating Wire for Water Heater
  • Bright 0cr25al5 Fecral High-Resistance Heating Wire for Water Heater
  • Bright 0cr25al5 Fecral High-Resistance Heating Wire for Water Heater

Bright 0cr25al5 Fecral High-Resistance Heating Wire for Water Heater

Product Type: Wire
Material: Fecral
Carbon Content: Low Carbon
Resistivity at 20oc: 1.42±0.06 Ohm mm2/M
Color: Bright
Density: 7.1
Customization:

Contact Supplier

Diamond Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
0cr25al5
Melting Point
1500
Transport Package
Wooden Case
Specification
ISO9001, ISO14001
Trademark
UALLOY
Origin
China
HS Code
72209000
Production Capacity
300tons/Month

Product Description

Specifications

                                                                           0Cr25Al5
Chemical Content(%)
C P S Mn Si Cr Ni Al Fe Other
Max0.06 Max 0.025 Max 0.025 Max 0.70 Max 1.0 23.0~26.0 Max 0.60 4.5~6.5 Bal. -
 
Mechanical Properties
Max Continuous Service Temp 1250ºC
Resisivity at 20ºC 1.42±0.06 ohm mm2/m
Density 7.10 g/cm3
Thermal Conductivity 46.1KJ/m·h·ºC
Coefficient of Thermal Expansion 16.0×10-6/ºC
Melting Point 1500ºC
Tensile Strength 637~784 Mpa
Elongation Min 12%
Section Variation Shrink Rate 65~75%
Repeatedly Bend Frequency Min 5 times
Continuous Service Time -
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic
 

Furnace resistance alloy heating wire
1. A quite reasonable price
2. Stable performance:
3 high working temperature

Furnace resistance alloy heating wire
Specification:
We specializing in Ferro-Chrome (Fe-Cr-AL) wire, Nickel-Chrome (Nichrome) wire, Copper Nickel (Constantan) wire, Stainless steel wire and related products in alloys tailored to meet specific customer requirements.
Round wire from SWG 0 to SWG 48(Dia 0.04mm-8.0mm).
Ribbon/strip: Thickness: 0.04mm-0.75mm
Width: 0.08mm-6.0mm
Our furnace resistance alloy heating ribbon is of high quality with following features:
1. A quite reasonable price
2. Stable performance: High working temperature(The highest temperature can be 1400), high strength under temperature, corrosion resistance, long life-span, allowable high surface load, small specific gravity, good formability and weldability.

Delivery status and supply state of furnace resistance alloy heating ribbon
Wire and plate with the looseness or oxidation colour soft modal supply.
Strip except special requirements outside, general with after annealing oxidation colour supply.
The flat silk thread and protecting gas to light after annealing soft modal supply.
2, product packaging of furnace resistance alloy heating ribbon
Wire or strips to pack cloth bandaged volumes supply.
Thread and flat silk, axis encapsulate supply.
3, export products and users have special requirement, negotiation.
Note
1, when the design should be based on the power wiring method, reasonable surface load, the correct choice of silk diameter,
2, before installation coping furnace thorough examination, cleared ferritic, "carbon, and the electric stove contact risks to avoid short circuit, in case caused furnace silk breakdown,
3, when installation should press design wiring method properly connected;
4, in use before should check the sensitivity of the temperature control system, in case of failure, cause temperature burnt.

Send your message to this supplier

*From:
*To:
avatar Mr. Michael Qiu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Number of Employees
15
Year of Establishment
2012-02-06